bridge turnstile
2. Programmable equipment displays operating status
3. One-way. Two-way function.
4. Automatic reset function
5. Erosion control characteristics
6. Anti-flush function
7. Adjustable arm swing synchronization.
8. Automatically close the flap opening.
9. Double anti-clipping function:
Function
1. Self-check and alarm function. User-friendly maintenance and use; with automatic reset function. After a specified period of time, the gate opens. If the user does not pass. The system will automatically revoke the user's current access rights; the delay will be reset automatically. The standard automatic reset is after 10 seconds.
2. Through the main control of the semi-built small pressure plate. The programmable device displays the operating status.
3. When a valid card is read and the passenger passes. The arm can be turned off from 1-10 seconds delay, which can be set on the control panel.
4. One-way. Bidirectional function.
5. automatic reset function: after reading the card. If the passenger does not pass within the specified time period. The revolving door will cancel this pass-through permit. The prescribed time period for passing may be set by management.
6. If the passenger passes without reading the card or without reading the valid card. The swing guardrail will sound an alarm until the passenger returns from the swing guardrail, and then use a valid card to read the pass.
7. Erosion control features. In the absence of a door open signal reception. The arm will automatically lock.
8. Anti-impact function: If the signal arm is not opened, it will be tightly grasped.
9. Adjustable arm swing synchronization (for double pendulum case).
10. Adjustable normally open or closed. To meet the requirements of different venues.
11. Connect with various reading devices, which can be connected to the receiving signal relay switch.
12.Swing gate has RS485 interface, which can be used for remote control and integrates various readers and writers. Manage computers directly through remote control and management.
13. Automatically close the flap openings. Automatic power off. Compliance with fire safety requirements.
14. Dual anti-pinch function: photocell anti-pinch and mechanical anti-clipping. When passengers are passing through the swinging barrier. The photocell will detect this and will not shut down. Passengers after passing. The arm will automatically close. during the reset. If the arm encounters any obstacles. The arm will automatically recover or stop working for a period of time with a small force. It will also call the police.
15. Direction display to guide passengers in the direction of travel.
16. Card reading with or without memory function.
17.Swing barrier can control the internal population in the control of the software.
18. Smooth operation with little noise.
Specifications
swivel revolving door |
Bridge TS311 |
Materials |
stainless steel 304 |
Interface |
standard, fingerprint, tickets, IC, ID card |
support input mode |
double-sided card reading, paper tickets, fingerprints, coins |
working temperature |
-30 ℃-80 ℃ |
Working humidity |
5% to 90% |
Channel Width |
max. 600mm |
power supply |
input: AC 220V/230V/110V .. (adjustable) |
Alarm function |
infrared detection, illegal intrusion, trailing alarm, anti-pinch and other optional functions |
swing automatically shut down |
shutdown time |
Dimensions |
L1200 x W280 x H1000 mm |
competitive advantage
1.1.5mm thickness 304 stainless steel
2. Radio frequency identification card (IC/ID), bar code, fingerprint, acceptance control
3.CE and ISO 9001-2008 certification
Dimensions
bag